Skip to content
Workouts

Calculator

Barbell plate calculator

Type the weight you want on the bar and see which plates go on each side, loaded heaviest-first from the plates your gym has.

Bar weight
Plates available (kg)

Plates per side

1 × 25 + 1 × 15

On the bar: 100 kg (20 kg bar + plates)

One side of the bar

25
15
25 kg20 kg15 kg10 kg5 kg2.5 kg1.25 kg0.5 kg

Common targets with your plates

Total (kg)Plates per sideLoaded
601 × 2060
801 × 25 + 1 × 580
1001 × 25 + 1 × 15100
1202 × 25120
1402 × 25 + 1 × 10140
1602 × 25 + 1 × 20160
1803 × 25 + 1 × 5180
2003 × 25 + 1 × 15200

How the loading is worked out

The calculator subtracts the bar from your target and halves the rest, because every plate you add goes on both sleeves. That per-side weight is then filled greedily: it takes as many of the heaviest plate as fit, moves to the next size and repeats down to the smallest plate you ticked. 100 kg on a 20 kg bar leaves 40 kg per side, which is one 25 and one 15, or two 20s if you prefer fewer colours; the greedy rule always picks the fewest plates.

If the remaining weight cannot be made with your plates, the result shows the closest weight below the target and how far short it is. With 2.5 kg as your smallest plate the bar moves in 5 kg steps; adding 1.25 kg plates gives 2.5 kg steps, which is what you want for slow progression on the bench press and overhead press. The colours follow IPF competition plates (red 25, blue 20, yellow 15, green 10, white 5), so the drawing matches what you see on a calibrated bar.

Pair it with the one rep max calculator to turn training percentages into actual plates, or check what your total means against the strength standards.

Frequently asked questions

Why does the calculator show plates per side?

A barbell is loaded symmetrically, so the convention in every gym is to name one side: "two reds and a ten" means 2 × 25 kg + 10 kg on each sleeve. Total = bar + 2 × plates per side.

How much does a barbell weigh?

A standard Olympic men's bar is 20 kg (45 lb), the women's bar 15 kg (35 lb), and technique or junior bars 10 kg. Many commercial gym bars are 20 kg even when unmarked; EZ-curl bars weigh 7–12 kg.

Do I count the collars?

Competition collars weigh 2.5 kg each and count toward the lifted weight. Spring clips weigh 100–200 g and are ignored. If your gym uses heavy lockjaw collars (about 0.5 kg each), add 1 kg to the bar weight.

How should I ramp up to a heavy set?

Bar only for 10 reps, then about 50 %, 70 %, 85 % and 95 % of your work weight for 5, 3, 2 and 1 reps. Use the common-targets table to see what each step looks like in plates so you spend less time doing maths between sets.

My gym has pound plates. How do I convert?

1 kg = 2.2046 lb. A 45 lb plate is 20.4 kg, 35 lb is 15.9 kg, 25 lb is 11.3 kg, 10 lb is 4.5 kg. Enter your target in kg × 2.2046 to load lb plates, or just treat 45 lb as "20 kg" when following a kg program; the 2 % error does not matter.